Array ( [0] => {{Short description|Upward force that opposes the weight of an object immersed in fluid}} [1] => {{For|the 2019 film|Buoyancy (film)}} [2] => {{Multiple issues| [3] => {{More citations needed|date=July 2014}} [4] => {{Textbook|date=July 2023}} [5] => }} [6] => {{Use dmy dates|date=January 2023}} [7] => [[File:Buoyancy.svg|thumb|The forces at work in buoyancy. The object floats at rest because the upward force of buoyancy is equal to the downward force of [[gravity]].]] [8] => {{Continuum mechanics|cTopic=fluid}} [9] => [10] => '''Buoyancy''' ({{IPAc-en|ˈ|b|ɔɪ|ən|s|i|,_|ˈ|b|uː|j|ən|s|i}}),{{citation |last=Wells|first=John C. |author-link=John C. Wells |year=2008 |title=Longman Pronunciation Dictionary |edition=3rd |publisher=[[Longman]] |isbn=9781405881180}}{{citation |last=Roach|first=Peter |year=2011 |title=Cambridge [[English Pronouncing Dictionary]] |edition=18th |location=Cambridge |publisher=[[Cambridge University Press]] |isbn=9780521152532}} or '''upthrust''', is an upward [[force]] exerted by a [[fluid]] that opposes the [[weight]] of a partially or fully immersed object. In a column of fluid, [[pressure]] increases with depth as a result of the weight of the overlying fluid. Thus the pressure at the bottom of a column of fluid is greater than at the top of the column. Similarly, the pressure at the bottom of an object submerged in a fluid is greater than at the top of the object. The pressure difference results in a net upward force on the object. The magnitude of the force is proportional to the pressure difference, and (as explained by [[Archimedes' principle]]) is equivalent to the weight of the fluid that would otherwise occupy the submerged volume of the object, i.e. the [[Displacement (fluid)|displaced]] fluid. [11] => [12] => For this reason, an object whose average [[density]] is greater than that of the fluid in which it is submerged tends to sink. If the object is less dense than the liquid, the force can keep the object afloat. This can occur only in a [[non-inertial reference frame]], which either has a [[gravitational field]] or is [[acceleration|accelerating due to a force other than gravity]] defining a "downward" direction.Note: In the absence of surface tension, the mass of fluid displaced is equal to the submerged volume multiplied by the fluid density. High repulsive surface tension will cause the body to float higher than expected, though the same total volume will be displaced, but at a greater distance from the object. Where there is doubt about the meaning of "volume of fluid displaced", this should be interpreted as the overflow from a full container when the object is floated in it, or as the volume of the object below the average level of the fluid. [13] => [14] => Buoyancy also applies to fluid mixtures, and is the most common driving force of [[convection]] currents. In these cases, the mathematical modelling is altered to apply to [[Continuum mechanics|continua]], but the principles remain the same. Examples of buoyancy driven flows include the spontaneous separation of air and water or oil and water. [15] => [16] => The '''center of buoyancy''' of an object is the [[center of gravity]] of the displaced volume of fluid. [17] => [18] => ==Archimedes' principle== [19] => [[Image:Pound-coin-floating-in-mercury.jpg|right|thumb|A metallic coin (an old British [[British one pound coin|pound coin]]) floats in [[Mercury (element)|mercury]] due to the buoyancy force upon it and appears to float higher because of the [[surface tension]] of the mercury.]] [20] => [21] => {{Main|Archimedes' principle}} [22] => [[File:04. Галилеево топче.ogv|thumb|right|260px|The Galileo's Ball experiment, showing the different buoyancy of the same object, depending on its surrounding medium. The ball has certain buoyancy in [[water]], but once [[ethanol]] is added (which is less dense than water), it reduces the density of the medium, thus making the ball sink further down (reducing its buoyancy).]] [23] => [24] => Archimedes' principle is named after [[Archimedes]] of [[Syracuse, Sicily|Syracuse]], who first discovered this law in 212 BC.{{Cite journal |author=Acott, Chris |title=The diving "Law-ers": A brief resume of their lives. |journal=[[South Pacific Underwater Medicine Society Journal]] |volume=29 |issue=1 |year=1999 |issn=0813-1988 |oclc=16986801 |url=http://archive.rubicon-foundation.org/5990 |access-date=2009-06-13 |url-status=usurped |archive-url=https://web.archive.org/web/20110402073203/http://archive.rubicon-foundation.org/5990 |archive-date=2 April 2011 }}. For objects, floating and sunken, and in gases as well as liquids (i.e. a [[fluid]]), Archimedes' principle may be stated thus in terms of forces: [25] => [26] => {{Quotation|Any object, wholly or partially immersed in a fluid, is buoyed up by a force equal to the weight of the fluid displaced by the object}} [27] => —with the clarifications that for a sunken object the volume of displaced fluid is the volume of the object, and for a floating object on a liquid, the weight of the displaced liquid is the weight of the object.{{cite book |last1=Pickover |first1=Clifford A. |title=Archimedes to Hawking |publisher=Oxford University Press US |year=2008 |isbn=9780195336115 |pages=41 |language=en-US}} [28] => [29] => More tersely: '''buoyant force = weight of displaced fluid.''' [30] => [31] => Archimedes' principle does not consider the [[surface tension]] (capillarity) acting on the body,{{Cite web |url=http://www.weizmann.ac.il/home/fnfal/papers/Natfloat.pdf |title=Floater clustering in a standing wave: Capillarity effects drive hydrophilic or hydrophobic particles to congregate at specific points on a wave |date=23 June 2005 |url-status=live |archive-url=https://web.archive.org/web/20110721142904/http://www.weizmann.ac.il/home/fnfal/papers/Natfloat.pdf |archive-date=21 July 2011 }} but this additional force modifies only the amount of fluid displaced and [[Meniscus (liquid)|the spatial distribution of the displacement]], so the principle that ''buoyancy = weight of displaced fluid'' remains valid. [32] => [33] => The weight of the displaced fluid is directly proportional to the volume of the displaced fluid (if the surrounding fluid is of uniform density). In simple terms, the principle states that the buoyancy force on an object is equal to the weight of the fluid displaced by the object, or the density of the fluid multiplied by the submerged volume times the gravitational acceleration, g. Thus, among completely submerged objects with equal masses, objects with greater volume have greater buoyancy. This is also known as upthrust. [34] => [35] => Suppose a rock's weight is measured as 10 [[Newton (unit)|newton]]s when suspended by a string in a [[vacuum]] with gravity acting upon it. Suppose that when the rock is lowered into water, it displaces water of weight 3 newtons. The force it then exerts on the string from which it hangs would be 10 newtons minus the 3 newtons of buoyancy force: 10 − 3 = 7 newtons. Buoyancy reduces the apparent weight of objects that have sunk completely to the sea floor. It is generally easier to lift an object up through the water than it is to pull it out of the water. [36] => [37] => Assuming Archimedes' principle to be reformulated as follows, [38] => :\text{apparent immersed weight} = \text{weight} - \text{weight of displaced fluid}\, [39] => [40] => then inserted into the quotient of weights, which has been expanded by the mutual volume [41] => [42] => : \frac { \text{density of object}} { \text{density of fluid} } = \frac { \text{weight}} { \text{weight of displaced fluid} }, \, [43] => [44] => yields the formula below. The density of the immersed object relative to the density of the fluid can easily be calculated without measuring any volumes: [45] => [46] => : \frac { \text {density of object}} { \text{density of fluid} } = \frac { \text{weight}} { \text{weight} - \text{apparent immersed weight}}\, [47] => [48] => (This formula is used for example in describing the measuring principle of a [[dasymeter]] and of [[hydrostatic weighing]].) [49] => [50] => Example: If you drop wood into water, buoyancy will keep it afloat. [51] => [52] => Example: A helium balloon in a moving car. During a period of increasing speed, the air mass inside the car moves in the direction opposite to the car's acceleration (i.e., towards the rear). The balloon is also pulled this way. However, because the balloon is buoyant relative to the air, it ends up being pushed "out of the way", and will actually drift in the same direction as the car's acceleration (i.e., forward). If the car slows down, the same balloon will begin to drift backward. For the same reason, as the car goes round a curve, the balloon will drift towards the inside of the curve. [53] => [54] => ==Forces and equilibrium== [55] => {{Unreferenced section|date=January 2016}} [56] => [[File:Canard Colvert 02.jpg|thumb|419x419px|A [[duck]] has difficulties to get under water due to its buoyancy. When no swimming forces are implied, the natural equilibrium of forces keeps about half of the duck off water. ]] [57] => The equation to calculate the pressure inside a fluid in equilibrium is: [58] => [59] => : \mathbf{f}+\operatorname{div}\,\sigma=0 [60] => [61] => where '''f''' is the force density exerted by some outer field on the fluid, and ''σ'' is the [[Cauchy stress tensor]]. In this case the stress tensor is proportional to the identity tensor: [62] => [63] => : \sigma_{ij}=-p\delta_{ij}.\, [64] => [65] => Here ''δ''''ij'' is the [[Kronecker delta]]. Using this the above equation becomes: [66] => [67] => : \mathbf{f}=\nabla p.\, [68] => [69] => Assuming the outer force field is conservative, that is it can be written as the negative gradient of some scalar valued function: [70] => [71] => :\mathbf{f}=-\nabla\Phi.\, [72] => [73] => Then: [74] => [75] => : \nabla(p+\Phi)=0 \Longrightarrow p+\Phi = \text{constant}.\, [76] => [77] => Therefore, the shape of the open surface of a fluid equals the equipotential plane of the applied outer conservative force field. Let the ''z''-axis point downward. In this case the field is gravity, so Φ = −''ρfgz'' where ''g'' is the gravitational acceleration, ''ρf'' is the mass density of the fluid. Taking the pressure as zero at the surface, where ''z'' is zero, the constant will be zero, so the pressure inside the fluid, when it is subject to gravity, is [78] => [79] => :p=\rho_f g z.\, [80] => [81] => So pressure increases with depth below the surface of a liquid, as ''z'' denotes the distance from the surface of the liquid into it. Any object with a non-zero vertical depth will have different pressures on its top and bottom, with the pressure on the bottom being greater. This difference in pressure causes the upward buoyancy force. [82] => [83] => The buoyancy force exerted on a body can now be calculated easily, since the internal pressure of the fluid is known. The force exerted on the body can be calculated by integrating the stress tensor over the surface of the body which is in contact with the fluid: [84] => [85] => :\mathbf{B}=\oint \sigma \, d\mathbf{A}. [86] => [87] => The [[surface integral]] can be transformed into a [[volume integral]] with the help of the [[Gauss theorem]]: [88] => [89] => :\mathbf{B}=\int \operatorname{div}\sigma \, dV = -\int \mathbf{f}\, dV = -\rho_f \mathbf{g} \int\,dV=-\rho_f \mathbf{g} V [90] => [91] => where ''V'' is the measure of the volume in contact with the fluid, that is the volume of the submerged part of the body, since the fluid does not exert force on the part of the body which is outside of it. [92] => [93] => The magnitude of buoyancy force may be appreciated a bit more from the following argument. Consider any object of arbitrary shape and volume ''V'' surrounded by a liquid. The [[force]] the liquid exerts on an object within the liquid is equal to the weight of the liquid with a volume equal to that of the object. This force is applied in a direction opposite to gravitational force, that is of magnitude: [94] => [95] => :B = \rho_f V_\text{disp}\, g, \, [96] => [97] => where ''ρf'' is the [[density]] of the fluid, ''Vdisp'' is the volume of the displaced body of liquid, and ''g'' is the [[gravitational acceleration]] at the location in question. [98] => [99] => If this volume of liquid is replaced by a solid body of exactly the same shape, the force the liquid exerts on it must be exactly the same as above. In other words, the "buoyancy force" on a submerged body is directed in the opposite direction to gravity and is equal in magnitude to [100] => [101] => :B = \rho_f V g. \, [102] => [103] => Though the above derivation of Archimedes principle is correct, a recent paper by the Brazilian physicist Fabio M. S. Lima brings a more general approach for the evaluation of the buoyant force exerted by any fluid (even non-homogeneous) on a body with arbitrary shape.{{cite journal |last1=Lima |first1=Fábio M. S. |title=Using surface integrals for checking Archimedes' law of buoyancy |journal=European Journal of Physics |date=22 January 2012 |volume=33 |issue=1 |pages=101–113 |doi=10.1088/0143-0807/33/1/009 |url=https://iopscience.iop.org/article/10.1088/0143-0807/33/1/009 |access-date=8 April 2021 |ref=Lima2012|arxiv=1110.5264 |bibcode=2012EJPh...33..101L |s2cid=54556860 }} Interestingly, this method leads to the prediction that the buoyant force exerted on a rectangular block touching the bottom of a container points downward! Indeed, this downward buoyant force has been confirmed experimentally.{{cite journal |last1=Lima |first1=Fábio M. S. |title=A downward buoyant force experiment |journal=Revista Brasileira de Ensino de Fisica |date=11 May 2014 |volume=36 |issue=2 |page=2309 |doi=10.1590/S1806-11172014000200009 |ref=Lima2014|doi-access=free }} [104] => [105] => The [[net force]] on the object must be zero if it is to be a situation of fluid statics such that Archimedes principle is applicable, and is thus the sum of the buoyancy force and the object's weight [106] => [107] => :F_\text{net} = 0 = m g - \rho_f V_\text{disp} g \, [108] => [109] => If the buoyancy of an (unrestrained and unpowered) object exceeds its weight, it tends to rise. An object whose weight exceeds its buoyancy tends to sink. Calculation of the upwards force on a submerged object during its [[acceleration|accelerating]] period cannot be done by the Archimedes principle alone; it is necessary to consider dynamics of an object involving buoyancy. Once it fully sinks to the floor of the fluid or rises to the surface and settles, Archimedes principle can be applied alone. For a floating object, only the submerged volume displaces water. For a sunken object, the entire volume displaces water, and there will be an additional force of reaction from the solid floor. [110] => [111] => In order for Archimedes' principle to be used alone, the object in question must be in equilibrium (the sum of the forces on the object must be zero), therefore; [112] => [113] => :mg = \rho_f V_\text{disp} g, \, [114] => [115] => and therefore [116] => [117] => :m = \rho_f V_\text{disp}. \, [118] => [119] => showing that the depth to which a floating object will sink, and the volume of fluid it will displace, is independent of the [[gravitational field]] regardless of geographic location. [120] => :(''Note: If the fluid in question is [[seawater]], it will not have the same [[density]] (''ρ'') at every location, since the density depends on temperature and [[salinity]]. For this reason, a ship may display a [[Waterline#Load line|Plimsoll line]].)'' [121] => [122] => It can be the case that forces other than just buoyancy and gravity come into play. This is the case if the object is restrained or if the object sinks to the solid floor. An object which tends to float requires a [[tension (physics)|tension]] restraint force T in order to remain fully submerged. An object which tends to sink will eventually have a [[normal force]] of constraint N exerted upon it by the solid floor. The constraint force can be tension in a spring scale measuring its weight in the fluid, and is how apparent weight is defined. [123] => [124] => If the object would otherwise float, the tension to restrain it fully submerged is: [125] => [126] => :T = \rho_f V g - m g . \, [127] => [128] => When a sinking object settles on the solid floor, it experiences a [[normal force]] of: [129] => [130] => :N = m g - \rho_f V g . \, [131] => [132] => Another possible formula for calculating buoyancy of an object is by finding the apparent weight of that particular object in the air (calculated in Newtons), and apparent weight of that object in the water (in Newtons). To find the force of buoyancy acting on the object when in air, using this particular information, this formula applies: [133] => [134] => : '''Buoyancy force = weight of object in empty space − weight of object immersed in fluid''' [135] => [136] => The final result would be measured in Newtons. [137] => [138] => Air's density is very small compared to most solids and liquids. For this reason, the weight of an object in air is approximately the same as its true weight in a vacuum. The buoyancy of air is neglected for most objects during a measurement in air because the error is usually insignificant (typically less than 0.1% except for objects of very low average density such as a balloon or light foam). [139] => [140] => ===Simplified model=== [141] => [[File:Pressure distribution on an immersed cube.png|thumb|Pressure distribution on an immersed cube]] [142] => [[File:Forces on an immersed cube.png|thumb|Forces on an immersed cube]] [143] => [[File:Approximation of an arbitrary volume as a group of cubes.png|thumb|Approximation of an arbitrary volume as a group of cubes]] [144] => [145] => A simplified explanation for the integration of the pressure over the contact area may be stated as follows: [146] => [147] => Consider a cube immersed in a fluid with the upper surface horizontal. [148] => [149] => The sides are identical in area, and have the same depth distribution, therefore they also have the same pressure distribution, and consequently the same total force resulting from hydrostatic pressure, exerted perpendicular to the plane of the surface of each side. [150] => [151] => There are two pairs of opposing sides, therefore the resultant horizontal forces balance in both orthogonal directions, and the resultant force is zero. [152] => [153] => The upward force on the cube is the pressure on the bottom surface integrated over its area. The surface is at constant depth, so the pressure is constant. Therefore, the integral of the pressure over the area of the horizontal bottom surface of the cube is the hydrostatic pressure at that depth multiplied by the area of the bottom surface. [154] => [155] => Similarly, the downward force on the cube is the pressure on the top surface integrated over its area. The surface is at constant depth, so the pressure is constant. Therefore, the integral of the pressure over the area of the horizontal top surface of the cube is the hydrostatic pressure at that depth multiplied by the area of the top surface. [156] => [157] => As this is a cube, the top and bottom surfaces are identical in shape and area, and the pressure difference between the top and bottom of the cube is directly proportional to the depth difference, and the resultant force difference is exactly equal to the weight of the fluid that would occupy the volume of the cube in its absence. [158] => [159] => This means that the resultant upward force on the cube is equal to the weight of the fluid that would fit into the volume of the cube, and the downward force on the cube is its weight, in the absence of external forces. [160] => [161] => This analogy is valid for variations in the size of the cube. [162] => [163] => If two cubes are placed alongside each other with a face of each in contact, the pressures and resultant forces on the sides or parts thereof in contact are balanced and may be disregarded, as the contact surfaces are equal in shape, size and pressure distribution, therefore the buoyancy of two cubes in contact is the sum of the buoyancies of each cube. This analogy can be extended to an arbitrary number of cubes. [164] => [165] => An object of any shape can be approximated as a group of cubes in contact with each other, and as the size of the cube is decreased, the precision of the approximation increases. The limiting case for infinitely small cubes is the exact equivalence. [166] => [167] => Angled surfaces do not nullify the analogy as the resultant force can be split into orthogonal components and each dealt with in the same way. [168] => [169] => ===Static stability=== [170] => {{main|Ship stability}} [171] => [[File:ship stability.svg|thumb|Illustration of the stability of bottom-heavy (left) and top-heavy (right) ships with respect to the positions of their centres of buoyancy (CB) and gravity (CG)]] [172] => A floating object is stable if it tends to restore itself to an equilibrium position after a small displacement. For example, floating objects will generally have vertical stability, as if the object is pushed down slightly, this will create a greater buoyancy force, which, unbalanced by the weight force, will push the object back up. [173] => [174] => Rotational stability is of great importance to floating vessels. Given a small angular displacement, the vessel may return to its original position (stable), move away from its original position (unstable), or remain where it is (neutral). [175] => [176] => Rotational stability depends on the relative lines of action of forces on an object. The upward buoyancy force on an object acts through the center of buoyancy, being the [[centroid]] of the displaced volume of fluid. The weight force on the object acts through its [[Center of mass|center of gravity]]. A buoyant object will be stable if the center of gravity is beneath the center of buoyancy because any angular displacement will then produce a 'righting [[moment (physics)|moment]]'. [177] => [178] => The stability of a buoyant object at the surface is more complex, and it may remain stable even if the center of gravity is above the center of buoyancy, provided that when disturbed from the equilibrium position, the center of buoyancy moves further to the same side that the center of gravity moves, thus providing a positive righting moment. If this occurs, the floating object is said to have a positive [[metacentric height]]. This situation is typically valid for a range of heel angles, beyond which the center of buoyancy does not move enough to provide a positive righting moment, and the object becomes unstable. It is possible to shift from positive to negative or vice versa more than once during a heeling disturbance, and many shapes are stable in more than one position. [179] => [180] => == Fluids and objects== [181] => {{Unreferenced section|date=January 2016}} [182] => As a [[submarine]] expels water from its buoyancy tanks, it rises because its volume is constant (the volume of water it displaces if it is fully submerged) while its mass is decreased. [183] => [184] => ===Compressible objects=== [185] => As a floating object rises or falls, the forces external to it change and, as all objects are compressible to some extent or another, so does the object's volume. Buoyancy depends on volume and so an object's buoyancy reduces if it is compressed and increases if it expands. [186] => [187] => If an object at equilibrium has a [[compressibility]] less than that of the surrounding fluid, the object's equilibrium is stable and it remains at rest. If, however, its compressibility is greater, its equilibrium is then [[unstable]], and it rises and expands on the slightest upward perturbation, or falls and compresses on the slightest downward perturbation. [188] => [189] => ====Submarines==== [190] => {{see also|Submarine#Submersion and trimming}} [191] => [[Submarine]]s rise and dive by filling large [[ballast]] tanks with seawater. To dive, the tanks are opened to allow air to exhaust out the top of the tanks, while the water flows in from the bottom. Once the weight has been balanced so the overall density of the submarine is equal to the water around it, it has neutral buoyancy and will remain at that depth. Most military submarines operate with a slightly negative buoyancy and maintain depth by using the "lift" of the stabilizers with forward motion.{{citation needed|date=May 2017}} [192] => [193] => ====Balloons==== [194] => The height to which a [[balloon]] rises tends to be stable. As a balloon rises it tends to increase in volume with reducing atmospheric pressure, but the balloon itself does not expand as much as the air on which it rides. The average density of the balloon decreases less than that of the surrounding air. The weight of the displaced air is reduced. A rising balloon stops rising when it and the displaced air are equal in weight. Similarly, a sinking balloon tends to stop sinking. [195] => [196] => ====Divers==== [197] => Underwater divers are a common example of the problem of unstable buoyancy due to compressibility. The diver typically wears an exposure suit which relies on gas-filled spaces for insulation, and may also wear a [[Buoyancy compensator (diving)|buoyancy compensator]], which is a variable volume buoyancy bag which is inflated to increase buoyancy and deflated to decrease buoyancy. The desired condition is usually neutral buoyancy when the diver is swimming in mid-water, and this condition is unstable, so the diver is constantly making fine adjustments by control of lung volume, and has to adjust the contents of the buoyancy compensator if the depth varies. [198] => [199] => ==Density== [200] => {{Unreferenced section|date=January 2016}} [201] => [[Image:Density column.JPG|thumb|right|upright|Density column of liquids and solids: [[baby oil]], [[rubbing alcohol]] (with red [[food colouring]]), [[vegetable oil]], [[wax]], [[water]] (with blue food colouring) and [[aluminium]].]] [202] => If the weight of an object is less than the weight of the displaced fluid when fully submerged, then the object has an average density that is less than the fluid and when fully submerged will experience a buoyancy force greater than its own weight.{{cite book |last1=Pickover |first1=Clifford A. |title=Archimedes to Hawking |publisher=Oxford University Press US |year=2008 |isbn=9780195336115 |pages=42 |language=en-US}} If the fluid has a surface, such as water in a lake or the sea, the object will float and settle at a level where it displaces the same weight of fluid as the weight of the object. If the object is immersed in the fluid, such as a submerged submarine or air in a balloon, it will tend to rise. [203] => If the object has exactly the same density as the fluid, then its buoyancy equals its weight. It will remain submerged in the fluid, but it will neither sink nor float, although a disturbance in either direction will cause it to drift away from its position. [204] => An object with a higher average density than the fluid will never experience more buoyancy than weight and it will sink. [205] => A ship will float even though it may be made of steel (which is much denser than water), because it encloses a volume of air (which is much less dense than water), and the resulting shape has an average density less than that of the water. [206] => [207] => ==See also== [208] => [209] => [210] => {{div col|colwidth=35em}} [211] => * {{annotated link|Atmosphere of Earth|aka=Air}} [212] => * {{annotated link|Archimedes paradox}} [213] => * {{annotated link|Buoy}} [214] => * {{annotated link|Brunt–Väisälä frequency}} [215] => * {{annotated link|Buoyancy compensator (diving)}} [216] => * {{annotated link|Buoyancy compensator (aviation)}} [217] => * {{annotated link|Cartesian diver}} [218] => * {{annotated link|Dasymeter}} [219] => * {{annotated link|Diving weighting system}} [220] => * {{annotated link|Hydrostatics}} [221] => * {{annotated link|Galileo thermometer}} [222] => * {{annotated link|Hull (ship)}} [223] => * {{annotated link|Hydrometer}} [224] => * {{annotated link|Hydrostatic weighing}} [225] => * {{annotated link|Lighter than air}} [226] => * {{annotated link|Naval architecture}} [227] => * {{annotated link|Plimsoll line}} [228] => * {{annotated link|Pontoon (boat)|Pontoon}} [229] => * {{annotated link|Quicksand}} [230] => * {{annotated link|Salt fingering}} [231] => * {{annotated link|Submarine}} [232] => * {{annotated link|Swim bladder}} [233] => * {{annotated link|Thrust}} [234] => {{div col end}} [235] => [236] => [237] => ==References== [238] => {{Reflist}} [239] => [240] => ==External links== [241] => {{Wiktionary}} [242] => {{Commons category|Buoyancy}} [243] => *[https://web.archive.org/web/20150226084120/http://www.newton.dep.anl.gov/askasci/phy99/phy99x88.htm Falling in Water] [244] => * [[W. H. Besant]] (1889) [https://books.google.com/books?id=yGIVAAAAYAAJ ''Elementary Hydrostatics''] from [[Google Books]]. [245] => * [https://www.grc.nasa.gov/www/k-12/WindTunnel/Activities/buoy_Archimedes.html NASA's definition of buoyancy] [246] => [247] => {{Authority control}} [248] => [249] => [[Category:Buoyancy| ]] [250] => [[Category:Fluid mechanics]] [251] => [[Category:Force]] [] => )
good wiki

Buoyancy

Buoyancy is a fundamental principle in physics, specifically in the study of fluid dynamics. It is the upward force exerted by a fluid, such as water or air, on an object immersed in it.

More about us

About

It is the upward force exerted by a fluid, such as water or air, on an object immersed in it. The force of buoyancy is equal to the weight of the fluid displaced by the object. This principle explains why certain objects float or sink in a fluid. The concept of buoyancy was first described by the ancient Greek mathematician Archimedes, who discovered that an object immersed in a fluid experiences a force equal to the weight of the displaced fluid. This principle became known as Archimedes' principle. The buoyant force is dependent on the density of the fluid and the volume of the object immersed in it. If the object's density is less than that of the fluid, it will experience a net upward force and float. On the other hand, if the object's density is greater, it will sink. The principle of buoyancy finds application in many areas, including shipbuilding, the design of submarines and balloons, and even in the development of life jackets and flotation devices. It also plays a crucial role in understanding the behavior of gases and liquids in various scientific and engineering fields. In addition to explaining the buoyant force, the Wikipedia page on buoyancy also discusses related concepts such as buoyant density, which is the effective density of an object submerged in a fluid, and the buoyancy compensator, a device used by scuba divers to control their buoyancy underwater. Overall, the Wikipedia page on buoyancy provides a comprehensive overview of this important principle, its history, and its applications in various fields.

Expert Team

Vivamus eget neque lacus. Pellentesque egauris ex.

Award winning agency

Lorem ipsum, dolor sit amet consectetur elitorceat .

10 Year Exp.

Pellen tesque eget, mauris lorem iupsum neque lacus.

You might be interested in

Archimedes

Archimedes was an ancient Greek mathematician, physicist, engineer, inventor, and astronomer.

Convection

Convection is a mode of heat transfer, where heat is transferred through the movement of fluids such as liquids or gases.

Fluid

Fluid is a state of matter in which particles are free to move and flow.

Seawater

Seawater refers to the saline water found in the Earth's oceans and seas.

Vacuum

A vacuum is a space devoid of matter, such as air or other gases.