Array ( [0] => {{Short description|Branch of pharmacology}} [1] => [[File:Linear PK Example.png|400px|thumb|right|A graph depicting a typical time course of drug plasma concentration over 96 hours, with oral administrations every 24 hours. The main pharmacokinetic metrics are annotated. Steady state is reached after about 5 × 12 = 60 hours.]] [2] => '''Pharmacokinetics''' (from [[Ancient Greek]] ''pharmakon'' "drug" and ''kinetikos'' "moving, putting in motion"; see [[chemical kinetics]]), sometimes abbreviated as '''PK''', is a branch of [[pharmacology]] dedicated to describing how the body affects a specific substance after administration.Pharmacokinetics. (2006). In ''[[Mosby's Dictionary of Medicine, Nursing & Health Professions]]''. Philadelphia, PA: Elsevier Health Sciences. Retrieved December 11, 2008, from http://www.credoreference.com/entry/6686418 The substances of interest include any chemical [[xenobiotic]] such as [[pharmaceutical drug]]s, [[pesticide]]s, [[food additive]]s, [[cosmetics]], etc. It attempts to analyze chemical [[metabolism]] and to discover the fate of a chemical from the moment that it is administered up to the point at which it is completely [[Excretion|eliminated from the body]]. Pharmacokinetics is based on mathematical modeling that places great emphasis on the relationship between drug plasma concentration and the time elapsed since the drug's administration. Pharmacokinetics is the study of how an organism affects the drug, whereas [[pharmacodynamics]] (PD) is the study of how the drug affects the organism. Both together influence [[dosing]], benefit, and [[adverse effect]]s, as seen in [[PK/PD models]]. [3] => [4] => {{Quote box [5] => | title = [[International Union of Pure and Applied Chemistry|IUPAC]] definition [6] => | quote = '''Pharmacokinetics''': [7] => # Process of the uptake of drugs by the body, the biotransformation they undergo, the distribution of the drugs and their [[metabolites]] in the tissues, and the elimination of the drugs and their metabolites from the body over a period of time. [8] => # Study of more such related processes{{cite journal | vauthors = Nordberg M, Duffus J, Templeton DM |title=Glossary of terms used in toxicokinetics (IUPAC Recommendations 2003) |journal=Pure and Applied Chemistry |date=1 January 2004 |volume=76 |issue=5 |pages=1033–1082 |doi=10.1351/pac200476051033|s2cid=98275795 |doi-access=free }} [9] => | align = right [10] => | width = 30% [11] => }} [12] => [13] => == ADME == [14] => {{Main | ADME}} [15] => [16] => A number of phases occur once the drug enters into contact with the organism, these are described using the acronym ADME (or LADME if liberation is included as a separate step from absorption): [17] => * [[Liberation (pharmacology)|'''L'''iberation]] – the process of the active ingredient separating from its [[pharmaceutical formulation]].{{cite book | title = Synopsis der Biopharmazie und Pharmakokinetik | vauthors = Koch HP, Ritschel WA | year = 1986 | publisher = Ecomed | location = Landsberg, München | language = de | isbn = 3-609-64970-4 | chapter = Liberation | pages = 99–131 }}{{cite journal | vauthors = Ruiz-Garcia A, Bermejo M, Moss A, Casabo VG | title = Pharmacokinetics in drug discovery | journal = Journal of Pharmaceutical Sciences | volume = 97 | issue = 2 | pages = 654–90 | date = February 2008 | pmid = 17630642 | doi = 10.1002/jps.21009 }} See also [[IVIVC]]. [18] => * [[Absorption (pharmacology)|'''A'''bsorption]] – the process of a drug entering into systemic circulation from the site of administration [19] => * [[Distribution (pharmacology)|'''D'''istribution]] – the dispersion or dissemination of substances throughout the fluids and tissues of the body. [20] => * [[Metabolism|'''M'''etabolism]] (or biotransformation, or inactivation) – the chemical reactions of the drug and irreversible breakdown into [[metabolite]]s (e.g. by metabolic [[enzyme]]s such as [[cytochrome P450]] or [[glucuronosyltransferase]] enzymes) [21] => * [[Elimination (pharmacology)|'''E'''xcretion]] – the removal of the substance or metabolites from the body. In rare cases, some [[drugs]] irreversibly accumulate in [[body tissue]]. {{Citation needed|reason=This is a strong claim and should be backed by literature reference(s)|date=February 2018}} [22] => [23] => Some textbooks combine the first two phases as the drug is often administered in an active form, which means that there is no liberation phase. Others include a phase that combines distribution, metabolism and excretion into a disposition phase. Other authors include the drug's toxicological aspect in what is known as ''ADME-Tox'' or ''ADMET''. The two phases of metabolism and excretion can be grouped together under the title [[elimination (pharmacology)|elimination]]. [24] => [25] => The study of these distinct phases involves the use and manipulation of basic concepts in order to understand the process dynamics. For this reason, in order to fully comprehend the ''kinetics'' of a drug it is necessary to have detailed knowledge of a number of factors such as: the properties of the substances that act as [[excipient]]s, the characteristics of the appropriate [[Cell membrane|biological membranes]] and the way that substances can cross them, or the characteristics of the [[enzyme kinetics|enzyme reactions]] that inactivate the drug. [26] => [27] => == Metrics == [28] => The following are the most commonly measured pharmacokinetic metrics:{{cite web |url = http://www.agah.eu/fileadmin/_migrated/content_uploads/PK-glossary_PK_working_group_2004.pdf |title = Collection of terms, symbols, equations, and explanations of common pharmacokinetic and pharmacodynamic parameters and some statistical functions |author = AGAH working group PHARMACOKINETICS |date = 2004-02-16 |publisher = Arbeitsgemeinschaft für Angewandte Humanpharmakologie (AGAH) (Association for Applied Human Pharmacology) |access-date = 2011-04-04 |archive-url = https://web.archive.org/web/20160508185420/http://www.agah.eu/fileadmin/_migrated/content_uploads/PK-glossary_PK_working_group_2004.pdf |archive-date = 2016-05-08 |url-status = dead }} The units of the dose in the table are expressed in [[mole (unit)|moles]] (mol) and [[molar (unit)|molar]] (M). To express the metrics of the table in units of mass, instead of [[Amount of substance]], simply replace 'mol' with 'g' and 'M' with 'g/dm3'. Similarly, other units in the table may be expressed in units of an equivalent [[dimension]] by scaling.{{Citation|last1=Hallare|first1=Jericho|title=Half Life|date=2021|url=http://www.ncbi.nlm.nih.gov/books/NBK554498/|work=StatPearls|place=Treasure Island (FL)|publisher=StatPearls Publishing|pmid=32119385|access-date=2021-12-25|last2=Gerriets|first2=Valerie}} [29] => {| class="wikitable" style="margin-left: auto; margin-right: auto;" [30] => |+ Pharmacokinetic metrics [31] => ! style="width:6.5em;" | Characteristic [32] => ! Description [33] => ! style="width:6em;" | Symbol [34] => ! Unit [35] => ! Formula [36] => ! Worked example
value [37] => |- [38] => | [[Dose (biochemistry)|Dose]] || Amount of drug administered. || D [39] => | \mathrm{mol} || {{n/a|Design parameter}} [40] => | 500 mmol [41] => |- [42] => | [[Dosing interval]] || Time interval between drug dose administrations. || \tau [43] => | \mathrm{h} || {{n/a|Design parameter}} [44] => | 24 h [45] => |- [46] => | [[Cmax (pharmacology)|{{nobr|Maximum serum concentration}}]] || The peak plasma concentration of a drug after administration. || C_\text{max} [47] => | \mathrm{mmol/L} || {{n/a|Direct measurement}} [48] => | 60.9 mmol/L [49] => |- [50] => | [[tmax (pharmacology)|{{nobr|Minimum time for Cmax}}]] || Minimum time taken to reach Cmax. || t_\text{max} [51] => | \mathrm{h} || {{n/a|Direct measurement}} [52] => | 3.9 h [53] => |- [54] => | {{nobr|[[Cmin (pharmacology)|Minimum plasma concentration]]}} || The lowest ([[trough level|trough]]) concentration that a drug reaches before the next dose is administered. [55] => | C_{\text{min}, \text{ss}} [56] => | \mathrm{mmol/L} || C_{min}= \frac{SFD k_a}{V_d(k_a-k)}\times\{\frac{e^{-k_e\tau}}{1-e^{-k_e\tau}}-\frac{e^{-k_a\tau}}{1-e^{-k_a\tau}}\} [57] => | 27.7 mmol/L [58] => |- [59] => | {{nobr|[[Cavg|Average plasma concentration]]}} || The average plasma concentration of a drug over the dosing interval in [[Steady_state#Pharmacy|steady state]]. [60] => | C_{\text{av}, \text{ss}} [61] => | \mathrm{h\times mmol/L} || \frac{AUC_{\tau,\text{ss}}}{\tau} [62] => | 55.0 h×mmol/L [63] => |- [64] => | [[Volume of distribution]] || The apparent volume in which a drug is distributed (i.e., the parameter relating drug concentration in plasma to drug amount in the body). [65] => | V_\text{d} [66] => | \mathrm{L} || \frac{D}{C_0} [67] => | 6.0 L [68] => |- [69] => | [[Concentration]] || Amount of drug in a given volume of [[blood plasma|plasma]]. || C_{0}, C_\text{ss} [70] => | \mathrm{mmol/L} || \frac{D}{V_\text{d}} [71] => | 83.3 mmol/L [72] => |- [73] => | [[Absorption half-life]] || The time required for 50% of a given dose of drug to be absorbed into the systemic circulation.{{Citation |last=Hallare |first=Jericho |title=Half Life |date=2023 |url=http://www.ncbi.nlm.nih.gov/books/NBK554498/ |work=StatPearls |access-date=2023-05-23 |place=Treasure Island (FL) |publisher=StatPearls Publishing |pmid=32119385 |last2=Gerriets |first2=Valerie}} [74] => | t_{\frac{1}{2}a} [75] => | \mathrm{h} || \frac{\ln(2)}{k_\text{a}} [76] => | 1.0 h [77] => |- [78] => | [[Absorption rate constant]] || The rate at which a drug enters into the body for oral and other extravascular routes. [79] => | k_\text{a} [80] => | \mathrm{h}^{-1} || \frac{\ln(2)}{t_{\frac{1}{2}a}} [81] => | 0.693 h−1 [82] => |- [83] => | [[Biological half-life|Elimination half-{{zero width joiner}}life]] || The time required for the concentration of the drug to reach half of its original value. [84] => | t_{\frac{1}{2}b} [85] => | \mathrm{h} || \frac{\ln(2)}{k_\text{e}} [86] => | 12 h [87] => |- [88] => | [[Elimination rate constant]] || The rate at which a drug is removed from the body. || k_\text{e} [89] => | \mathrm{h}^{-1} || \frac{\ln(2)}{t_{\frac{1}{2}b}} = \frac{CL}{V_\text{d}} [90] => | 0.0578 h−1 [91] => |- [92] => | [[Infusion rate]] || Rate of infusion required to balance elimination. || k_\text{in} [93] => | \mathrm{mol/h} || C_\text{ss} \cdot CL [94] => | 50 mmol/h [95] => |- [96] => | rowspan=2 | [[Area under the curve (pharmacokinetics)|Area under the curve]] [97] => | rowspan=2 | The [[integral]] of the concentration-time curve (after a single dose or in steady state). [98] => | AUC_{0 - \infty} [99] => | \mathrm{M}\cdot\mathrm{s} [100] => | \int_{0}^{\infty}C\, \mathrm{d}t [101] => | rowspan="2" |1,320 h×mmol/L [102] => |- [103] => | AUC_{\tau, \text{ss}} [104] => | \mathrm{M}\cdot\mathrm{s} [105] => | \int_{t}^{t + \tau}C\, \mathrm{d}t [106] => |- [107] => | [[Clearance (medicine)|Clearance]] || The volume of plasma cleared of the drug per unit time. || CL [108] => | \mathrm{m}^3/\mathrm{s} || V_\text{d} \cdot k_\text{e} = \frac{D}{AUC} [109] => | 0.38 L/h [110] => |- [111] => | [[Bioavailability]] || The systemically available fraction of a drug. || f [112] => | Unitless || \frac{AUC_\text{po} \cdot D_\text{iv}}{AUC_\text{iv} \cdot D_\text{po}} [113] => | 0.8 [114] => |- [115] => | [[Peak-to-trough ratio|Fluctuation]] || Peak–trough fluctuation within one dosing interval at steady state. || \%PTF [116] => | \% [117] => | 100\frac{C_{\text{max}, \text{ss}} - C_{\text{min}, \text{ss}}}{C_{\text{av}, \text{ss}}} [118] => where [119] => C_{\text{av}, \text{ss}}=\frac{AUC_{\tau,\text{ss}}}{\tau} [120] => | 41.8% [121] => |} [122] => [123] => {{anchor|steady state}} [124] => In pharmacokinetics, ''steady state'' refers to the situation where the overall intake of a drug is fairly in [[dynamic equilibrium]] with its elimination. In practice, it is generally considered that once regular dosing of a drug is started, steady state is reached after 3 to 5 times its half-life. In steady state and in linear pharmacokinetics, AUCτ=AUC∞.{{Cite web|url=https://sepia2.unil.ch/pharmacology/|title=Pharmacokinetics – Online content for student}} [125] => [126] => == Modeling == [127] => [128] => Models have been developed to simplify conceptualization of the many processes that take place in the interaction between an organism and a chemical substance. Pharmacokinetic modelling may be performed either by noncompartmental or [[compartment (pharmacokinetics)|compartment]]al methods. [[Multi-compartment model]]s provide the best approximations to reality; however, the complexity involved in adding parameters with that modelling approach means that ''monocompartmental models'' and above all ''two compartmental models'' are the most-frequently used. The model outputs for a drug can be used in industry (for example, in calculating [[bioequivalence]] when designing generic drugs) or in the clinical application of pharmacokinetic concepts. Clinical pharmacokinetics provides many performance guidelines for effective and efficient use of drugs for human-health professionals and in [[veterinary medicine]]. [129] => [130] => Models generally take the form of [[Expression (mathematics)|mathematical formulas]] that have a corresponding [[Graph of a function|graphical representation]]. The use of these models allows an understanding of the characteristics of a [[molecule]], as well as how a particular drug will behave given information regarding some of its basic characteristics such as its [[acid dissociation constant]] (pKa), [[bioavailability]] and [[solubility]], absorption capacity and distribution in the organism. A variety of analysis techniques may be used to develop models, such as [[nonlinear regression]] or curve stripping. [131] => [132] => === Noncompartmental analysis === [133] => Noncompartmental methods estimate PK parameters directly from a table of concentration-time measurements. Noncompartmental methods are versatile in that they do not assume any specific model and generally produce accurate results acceptable for bioequivalence studies. Total drug exposure is most often estimated by area under the curve (AUC) methods, with the [[trapezoidal rule]] ([[numerical integration]]) the most common method. Due to the dependence on the length of ''x'' in the trapezoidal rule, the area estimation is highly dependent on the blood/plasma sampling schedule. That is, the closer time points are, the closer the trapezoids reflect the actual shape of the concentration-time curve. The number of time points available in order to perform a successful NCA analysis should be enough to cover the absorption, distribution and elimination phase to accurately characterize the drug. Beyond AUC exposure measures, parameters such as Cmax (maximum concentration), Tmax (time to maximum concentration), CL and Vd can also be reported using NCA methods. [134] => [135] => === Compartmental analysis === [136] => Compartment models methods estimate the concentration-time graph by modeling it as a system of differential equations. These models are based on a consideration of an organism as a number of related ''compartments''. Both single compartment and [[multi-compartment model]]s are in use. PK compartmental models are often similar to kinetic models used in other scientific disciplines such as [[chemical kinetics]] and [[thermodynamics]]. The advantage of compartmental over noncompartmental analysis is the ability to modify parameters and to extrapolate to novel situations. The disadvantage is the difficulty in developing and validating the proper model. Although compartment models have the potential to realistically model the situation within an organism, models inevitably make simplifying assumptions and will not be applicable in all situations. However complicated and precise a model may be, it still does not truly represent reality despite the effort involved in obtaining various distribution values for a drug. This is because the concept of distribution volume is a relative concept that is not a true reflection of reality. The choice of model therefore comes down to deciding which one offers the lowest margin of error for the drug involved. [137] => [138] => ==== Single-compartment model ==== [139] => [[File:Farmacocinética lineal.svg|thumb|250px|Graph representing the monocompartmental action model]] [140] => The simplest PK compartmental model is the one-compartmental PK model. This models an organism as one homogenous compartment. This ''monocompartmental model'' presupposes that [[blood plasma]] concentrations of the drug are the only information needed to determine the drug's concentration in other fluids and tissues. For example, the concentration in other areas may be approximately related by known, constant factors to the blood plasma concentration. [141] => [142] => In this one-compartment model, the most common model of elimination is [[first order kinetics]], where the elimination of the drug is directly proportional to the drug's concentration in the organism. This is often called ''linear pharmacokinetics'', as the change in concentration over time can be expressed as a linear differential equation \frac{dC}{dt} = -k_\text{el} C. Assuming a single IV bolus [[dose (biochemistry)|dose]] resulting in a concentration C_\text{initial} at time t=0, the equation can be solved to give C=C_\text{initial} \times e^{-k_\text{el} \times t}. [143] => [144] => ==== Two-compartment model ==== [145] => Not all body tissues have the same [[blood| blood supply]], so the distribution of the drug will be slower in these tissues than in others with a better blood supply. In addition, there are some tissues (such as the [[brain]] tissue) that present a real barrier to the distribution of drugs, that can be breached with greater or lesser ease depending on the drug's characteristics. If these relative conditions for the different tissue types are considered along with the rate of elimination, the organism can be considered to be acting like two compartments: one that we can call the ''central compartment'' that has a more rapid distribution, comprising organs and systems with a well-developed blood supply; and a ''peripheral compartment'' made up of organs with a lower blood flow. Other tissues, such as the brain, can occupy a variable position depending on a drug's ability to cross the [[Blood–brain barrier|barrier]] that separates the organ from the blood supply. [146] => [147] => Two-compartment models vary depending on which compartment elimination occurs in. The most common situation is that elimination occurs in the central compartment as the [[liver]] and [[kidneys]] are organs with a good blood supply. However, in some situations it may be that elimination occurs in the peripheral compartment or even in both. This can mean that there are three possible variations in the two compartment model, which still do not cover all possibilities.Milo Gibaldi, Donald Perrier. ''Farmacocinética''Reverté 1982 pages 1–10. {{ISBN|84-291-5535-X}}, 9788429155358 [148] => [149] => ==== Multi-compartment models ==== [150] => {{Further|Multi-compartment model}} [151] => [[File:Farmacocinética no lineal.svg|thumb|200px| Graphs for absorption and elimination for a non-linear pharmacokinetic model]] [152] => In the real world, each tissue will have its own distribution characteristics and none of them will be strictly linear. The two-compartment model may not be applicable in situations where some of the enzymes responsible for metabolizing the drug become saturated, or where an active elimination mechanism is present that is independent of the drug's plasma concentration. If we label the drug's [[volume of distribution]] within the organism '''VdF''' and its volume of distribution in a tissue '''VdT''' the former will be described by an equation that takes into account all the tissues that act in different ways, that is: [153] => [154] => : Vd_F = Vd_{T1} + Vd_{T2} + Vd_{T3} + \cdots + Vd_{Tn}\, [155] => [156] => This represents the ''multi-compartment model'' with a number of curves that express complicated equations in order to obtain an overall curve. A number of [[computer program]]s have been developed to plot these equations. The most complex PK models (called [[PBPK]] models) rely on the use of physiological information to ease development and validation. [157] => [158] => The graph for the non-linear relationship between the various factors is represented by a [[curve]]; the relationships between the factors can then be found by calculating the dimensions of different areas under the curve. The models used in ''non-linear pharmacokinetics'' are largely based on [[Michaelis–Menten kinetics]]. A reaction's factors of non-linearity include the following: [159] => [160] => * Multiphasic absorption: Drugs injected [[intravenous therapy|intravenously]] are removed from the plasma through two primary mechanisms: (1) Distribution to body tissues and (2) metabolism + excretion of the drugs. The resulting decrease of the drug's plasma concentration follows a biphasic pattern (see figure).[[File:Iv time conc curve.svg|thumb|Plasma drug concentration vs time after an IV dose]] [161] => ** Alpha phase: An initial phase of rapid decrease in plasma concentration. The decrease is primarily attributed to drug distribution from the central compartment (circulation) into the peripheral compartments (body tissues). This phase ends when a pseudo-equilibrium of drug concentration is established between the central and peripheral compartments. [162] => ** Beta phase: A phase of gradual decrease in plasma concentration after the alpha phase. The decrease is primarily attributed to drug elimination, that is, metabolism and excretion.{{cite journal |vauthors=Gill SC, Moon-Mcdermott L, Hunt TL, Deresinski S, Blaschke T, Sandhaus RA |title=Phase I Pharmacokinetics of Liposomal Amikacin (MiKasome) in Human Subjects: Dose Dependence and Urinary Clearance | journal = Abstr Intersci Conf Antimicrob Agents Chemother |date=Sep 1999 | page = 33 (abstract no. 1195) | volume = 39 | url = http://gateway.nlm.nih.gov/MeetingAbstracts/ma?f=102244695.html}} [163] => ** Additional phases (gamma, delta, etc.) are sometimes seen.{{cite book | first1 = Daniel | last1 = Weiner | first2 = Johan | last2 = Gabrielsson | name-list-style = vanc | title = Pharmacokinetic/pharmacodynamic data analysis: concepts and applications | publisher = Apotekarsocieteten | year = 2000 | pages = 527–36 | isbn = 91-86274-92-9 | chapter-url = https://books.google.com/books?id=K-gT2_Ukk0QC&q=pharmacokinetic%20alpha%20beta%20gamma%20phase&pg=PA528 | chapter = PK24 – Non-linear kinetics – flow II }} [164] => * A drug's characteristics make a clear distinction between tissues with high and low blood flow. [165] => * Enzymatic [[Binding site|saturation]]: When the dose of a drug whose elimination depends on biotransformation is increased above a certain threshold the enzymes responsible for its metabolism become saturated. The drug's plasma concentration will then increase disproportionately and its elimination will no longer be constant. [166] => * Induction or [[Enzyme inhibitor|enzymatic inhibition]]: Some drugs have the capacity to inhibit or stimulate their own metabolism, in negative or [[Positive feedback#In biology|positive feedback]] reactions. As occurs with [[fluvoxamine]], [[fluoxetine]] and [[phenytoin]]. As larger doses of these pharmaceuticals are administered the plasma concentrations of the unmetabolized drug increases and the [[Biological half-life|elimination half-life]] increases. It is therefore necessary to adjust the dose or other treatment parameters when a high dosage is required. [167] => * The kidneys can also establish active elimination mechanisms for some drugs, independent of plasma concentrations. [168] => [169] => It can therefore be seen that non-linearity can occur because of reasons that affect the entire pharmacokinetic sequence: absorption, distribution, metabolism and elimination. [170] => [171] => == Bioavailability == [172] => [[File:Pill box with pills.JPG|thumb|300px| Different forms of tablets, which will have different pharmacokinetic behaviours after their administration.]] [173] => {{Main | Bioavailability}} [174] => [175] => At a practical level, a drug's bioavailability can be defined as the proportion of the drug that reaches its site of action. From this perspective the [[intravenous therapy|intravenous]] administration of a drug provides the greatest possible bioavailability, and this method is considered to yield a bioavailability of 1 (or 100%). Bioavailability of other delivery methods is compared with that of intravenous injection (absolute bioavailability) or to a standard value related to other delivery methods in a particular study (relative bioavailability). [176] => [177] => : B_A = \frac{[ABC]_P \cdot D_{IV}}{[ABC]_{IV} \cdot D_P} [178] => [179] => : \mathit B_R = \frac{[ABC]_A \cdot \text{dose}_B}{[ABC]_B \cdot \text{dose}_A} [180] => [181] => Once a drug's bioavailability has been established it is possible to calculate the changes that need to be made to its dosage in order to reach the required blood plasma levels. Bioavailability is, therefore, a mathematical factor for each individual drug that influences the administered dose. It is possible to calculate the amount of a drug in the blood plasma that has a real potential to bring about its effect using the formula: [182] => [183] => :De = B \cdot Da\, [184] => [185] => where ''De'' is the [[Effective dose (pharmacology)|effective dose]], ''B'' bioavailability and ''Da'' the administered dose. [186] => [187] => Therefore, if a drug has a bioavailability of 0.8 (or 80%) and it is administered in a dose of 100 mg, the equation will demonstrate the following: [188] => [189] => :''De'' = 0.8 × 100 mg = 80 mg [190] => [191] => That is the 100 mg administered represents a blood plasma concentration of 80 mg that has the capacity to have a pharmaceutical effect. [192] => [193] => This concept depends on a series of factors inherent to each drug, such as:Michael E. Winter, Mary Anne Koda-Kimple, Lloyd Y. Young, Emilio Pol Yanguas ''Farmacocinética clínica básica'' Ediciones Díaz de Santos, 1994 pgs. 8–14 {{ISBN|84-7978-147-5}}, 9788479781477 (in Spanish) [194] => * [[Pharmaceutical drug|Pharmaceutical form]] [195] => * Chemical form [196] => * [[Route of administration]] [197] => * Stability [198] => * [[Metabolism]] [199] => [200] => These concepts, which are discussed in detail in their respective titled articles, can be mathematically quantified and integrated to obtain an overall mathematical equation: [201] => [202] => : De = Q\cdot Da\cdot B\, [203] => [204] => where '''Q''' is the drug's purity. [205] => [206] => : Va = \frac{Da \cdot B \cdot Q} \tau [207] => [208] => where Va is the drug's rate of administration and \tau is the rate at which the absorbed drug reaches the circulatory system. [209] => [210] => Finally, using the [[Henderson-Hasselbalch equation]], and knowing the drug's pKa\, ([[pH]] at which there is an equilibrium between its ionized and non-ionized molecules), it is possible to calculate the non-ionized concentration of the drug and therefore the concentration that will be subject to absorption: [211] => [212] => : \mathrm{pH} = \mathrm{pKa} + \log \frac B A [213] => [214] => When two drugs have the same bioavailability, they are said to be biological equivalents or bioequivalents. This concept of [[bioequivalence]] is important because it is currently used as a yardstick in the authorization of [[generic drug]]s in many countries. [215] => [216] => == Analysis == [217] => [218] => === Bioanalytical methods === [219] => [[Bioanalysis|Bioanalytical methods]] are necessary to construct a concentration-time profile. Chemical techniques are employed to measure the concentration of drugs in [[biological matrix]], most often plasma. Proper bioanalytical methods should be selective and sensitive. For example, [[microscale thermophoresis]] can be used to quantify how the biological matrix/liquid affects the affinity of a drug to its target.{{cite journal | vauthors = Baaske P, Wienken CJ, Reineck P, Duhr S, Braun D | title = Optical thermophoresis for quantifying the buffer dependence of aptamer binding | journal = Angewandte Chemie | volume = 49 | issue = 12 | pages = 2238–41 | date = March 2010 | pmid = 20186894 | doi = 10.1002/anie.200903998}} [220] => *{{cite web |date=February 24, 2010 |title=A hot road to new drugs |website=Phys.org |url=http://www.physorg.com/news186225693.html}}{{cite journal | vauthors = Wienken CJ, Baaske P, Rothbauer U, Braun D, Duhr S | title = Protein-binding assays in biological liquids using microscale thermophoresis | journal = Nature Communications | volume = 1 | issue = 7 | pages = 100 | date = October 2010 | pmid = 20981028 | doi = 10.1038/ncomms1093 | bibcode = 2010NatCo...1..100W | doi-access = free }} [221] => [222] => === Mass spectrometry === [223] => Pharmacokinetics is often studied using [[mass spectrometry]] because of the complex nature of the matrix (often plasma or urine) and the need for high sensitivity to observe concentrations after a low dose and a long time period. The most common instrumentation used in this application is [[liquid chromatography-mass spectrometry|LC-MS]] with a [[quadrupole mass analyzer|triple quadrupole mass spectrometer]]. [[Tandem mass spectrometry]] is usually employed for added specificity. Standard curves and internal standards are used for quantitation of usually a single pharmaceutical in the samples. The samples represent different time points as a pharmaceutical is administered and then metabolized or cleared from the body. Blank samples taken before administration are important in determining background and ensuring data integrity with such complex sample matrices. Much attention is paid to the linearity of the standard curve; however it is common to use [[curve fitting]] with more complex functions such as [[quadratic function|quadratics]] since the response of most mass spectrometers is not linear across large concentration ranges.{{cite journal | vauthors = Hsieh Y, Korfmacher WA | title = Increasing speed and throughput when using HPLC-MS/MS systems for drug metabolism and pharmacokinetic screening | journal = Current Drug Metabolism | volume = 7 | issue = 5 | pages = 479–89 | date = June 2006 | pmid = 16787157 | doi = 10.2174/138920006777697963 | s2cid = 13612670 }}{{cite journal | vauthors = Covey TR, Lee ED, Henion JD | title = High-speed liquid chromatography/tandem mass spectrometry for the determination of drugs in biological samples | journal = Analytical Chemistry | volume = 58 | issue = 12 | pages = 2453–60 | date = October 1986 | pmid = 3789400 | doi = 10.1021/ac00125a022 }}{{cite journal | vauthors = Covey TR, Crowther JB, Dewey EA, Henion JD | title = Thermospray liquid chromatography/mass spectrometry determination of drugs and their metabolites in biological fluids | journal = Analytical Chemistry | volume = 57 | issue = 2 | pages = 474–81 | date = February 1985 | pmid = 3977076 | doi = 10.1021/ac50001a036 }} [224] => [225] => There is currently considerable interest in the use of very high sensitivity mass spectrometry for [[microdosing]] studies, which are seen as a promising alternative to [[animal experimentation]].{{cite web |url=http://www.ema.europa.eu/docs/en_GB/document_library/Scientific_guideline/2009/09/WC500002720.pdf|title=ICH guideline M3(R2) on non-clinical safety studies for the conduct of human clinical trials and marketing authorisation for pharmaceuticals |author = Committee for Medicinal Products for Human Use (CHMP) |date=December 2009 |id=EMA/CPMP/ICH/286/1995 |publisher=[[European Medicines Agency]], Evaluation of Medicines for Human Use |access-date= 4 May 2013}} Recent studies show that [[Secondary electrospray ionization]] (SESI-MS) can be used in drug monitoring, presenting the advantage of avoiding animal sacrifice.{{Cite journal|last1=Li|first1=Xue|last2=Martinez-Lozano Sinues|first2=Pablo|last3=Dallmann|first3=Robert|last4=Bregy|first4=Lukas|last5=Hollmén|first5=Maija|last6=Proulx|first6=Steven|last7=Brown|first7=Steven A.|last8=Detmar|first8=Michael|last9=Kohler|first9=Malcolm|last10=Zenobi|first10=Renato|date=2015-06-26|title=Drug Pharmacokinetics Determined by Real-Time Analysis of Mouse Breath|journal=Angewandte Chemie International Edition|language=en|volume=54|issue=27|pages=7815–7818|doi=10.1002/anie.201503312|pmid=26015026|hdl=20.500.11850/102558|hdl-access=free}} [226] => [227] => == Population pharmacokinetics == [228] => ''Population pharmacokinetics'' is the study of the sources and correlates of variability in drug concentrations among individuals who are the target patient population receiving clinically relevant doses of a drug of interest.{{cite journal | vauthors = Sheiner LB, Rosenberg B, Marathe VV | title = Estimation of population characteristics of pharmacokinetic parameters from routine clinical data | journal = Journal of Pharmacokinetics and Biopharmaceutics | volume = 5 | issue = 5 | pages = 445–79 | date = October 1977 | pmid = 925881 | doi = 10.1007/BF01061728 | s2cid = 28622472 }}{{cite journal | vauthors = Sheiner LB, Beal S, Rosenberg B, Marathe VV | title = Forecasting individual pharmacokinetics | journal = Clinical Pharmacology and Therapeutics | volume = 26 | issue = 3 | pages = 294–305 | date = September 1979 | pmid = 466923 | doi = 10.1002/cpt1979263294| s2cid = 41194071 }}{{cite journal | vauthors = Bonate PL | title = Recommended reading in population pharmacokinetic pharmacodynamics | journal = The AAPS Journal | volume = 7 | issue = 2 | pages = E363–73 | date = October 2005 | pmid = 16353916 | pmc = 2750974 | doi = 10.1208/aapsj070237 }} Certain patient demographic, pathophysiological, and therapeutical features, such as body weight, excretory and metabolic functions, and the presence of other therapies, can regularly alter dose-concentration relationships and can explain variability in exposures. For example, steady-state concentrations of drugs eliminated mostly by the kidney are usually greater in patients with [[kidney failure]] than they are in patients with normal kidney function receiving the same drug dosage. Population pharmacokinetics seeks to identify the measurable pathophysiologic factors and explain sources of variability that cause changes in the dose-concentration relationship and the extent of these changes so that, if such changes are associated with clinically relevant and significant shifts in exposures that impact the therapeutic index, dosage can be appropriately modified. [229] => An advantage of population pharmacokinetic modelling is its ability to analyse sparse data sets (sometimes only one concentration measurement per patient is available). [230] => [231] => == Clinical pharmacokinetics == [232] => {| class="wikitable floatright" [233] => |+ Drugs where pharmacokinetic monitoring is recommended [234] => ![[Antiepileptic]] [235] => medication [236] => !Cardioactive [237] => medication [238] => !Immunosuppressor [239] => medication [240] => ![[Antibiotic]] [241] => medication [242] => |- [243] => | [244] => * [[Phenytoin]] [245] => * [[Carbamazepine]] [246] => * [[Valproic acid]] [247] => * [[Lamotrigine]] [248] => * [[Ethosuximide]] [249] => * [[Phenobarbital]] [250] => * [[Primidone]] [251] => | [252] => * [[Digoxin]] [253] => * [[Lidocaine]] [254] => | [255] => * [[Ciclosporin]] [256] => * [[Tacrolimus]] [257] => * [[Sirolimus]] [258] => * [[Everolimus]] [259] => * [[Mycophenolate]] [260] => | [261] => * [[Gentamicin]] [262] => * [[Tobramycin]] [263] => * [[Amikacin]] [264] => * [[Vancomycin]] [265] => |- [266] => ![[Bronchodilator]] [267] => medication [268] => ![[Cytostatic]] [269] => medication [270] => ![[Antiviral drug|Antiviral]] [271] => (HIV) medication [272] => ![[Coagulation factor]]s [273] => |- [274] => | [275] => * [[Theophylline]] [276] => | [277] => * [[Methotrexate]] [278] => * [[5-Fluorouracil]] [279] => * [[Irinotecan]] [280] => | + [[Efavirenz]] [281] => * [[Tenofovir]] [282] => * [[Ritonavir]] [283] => | [284] => * [[Factor VIII]], [285] => * [[Factor IX]], [286] => * [[Factor VII]]a, [287] => * [[Factor XI]] [288] => |- [289] => |} [290] => [291] => Clinical pharmacokinetics (arising from the clinical use of population pharmacokinetics) is the direct application to a therapeutic situation of knowledge regarding a drug's pharmacokinetics and the characteristics of a population that a patient belongs to (or can be ascribed to). [292] => [293] => An example is the relaunch of the use of [[ciclosporin]] as an [[Immunosuppressive drug|immunosuppressor]] to facilitate organ transplant. The drug's therapeutic properties were initially demonstrated, but it was almost never used after it was found to cause [[nephrotoxicity]] in a number of patients.{{cite journal|first2 = R.|last2= García del Moral|first3= M.|last3= Andujar |first1=F.|last1= O'Valle |url = http://www.revistanefrologia.com/es-publicacion-nefrologia-articulo-mecanismos-nefrotoxicidad-por-ciclosporina-a-nivel-celular-X0211699595022690|title = Mecanismos de nefrotoxicidad por ciclosporina A a nivel celular|language =es|journal = Nefrologia|volume = 15 Supplement 1|date = 1995}} However, it was then realized that it was possible to individualize a patient's dose of ciclosporin by analysing the patients plasmatic concentrations (pharmacokinetic monitoring). This practice has allowed this drug to be used again and has facilitated a great number of organ transplants. [294] => [295] => Clinical monitoring is usually carried out by determination of plasma concentrations as this data is usually the easiest to obtain and the most reliable. The main reasons for determining a drug's plasma concentration include:Joaquín Herrera Carranza [https://books.google.com/books?id=7Vw7a4wBzRgC Manual de farmacia clínica y Atención Farmacéutica] (in Spanish). Published by Elsevier España, 2003; page 159. {{ISBN|84-8174-658-4}} [296] => * Narrow therapeutic range (difference between toxic and therapeutic concentrations) [297] => * High toxicity [298] => * High risk to life. [299] => [300] => == Ecotoxicology == [301] => {{expand section|date=April 2019}} [302] => [[Ecotoxicology]] is the branch of science that deals with the nature, effects, and interactions of substances that are harmful to the environment such as [[microplastics]] and other [[biosphere]] harmful substances.{{cite journal | vauthors = Jager T, Albert C, Preuss TG, Ashauer R | title = General unified threshold model of survival--a toxicokinetic-toxicodynamic framework for ecotoxicology | journal = Environmental Science & Technology | volume = 45 | issue = 7 | pages = 2529–40 | date = April 2011 | pmid = 21366215 | doi = 10.1021/es103092a | bibcode = 2011EnST...45.2529J }}{{cite web | url = http://www.ecotoxmodels.org/research-publications-projects/toxicokinetic-toxicodynamic-models/ | title = Toxicokinetic-Toxicodynamic Models – Ecotoxicology and Models | author = Ashauer R | publisher = Swiss Federal Institute of Aquatic Science and Technology | access-date = 2011-12-03 | url-status = dead | archive-url = https://web.archive.org/web/20120405200941/http://www.ecotoxmodels.org/research-publications-projects/toxicokinetic-toxicodynamic-models/ | archive-date = 2012-04-05 }} Ecotoxicology is studied in pharmacokinetics due to the substances responsible for harming the environment such as [[pesticide]]s can get into the bodies of living organisms. The health effects of these chemicals is thus subject to research and [[Clinical trial|safety trials]] by government or international agencies such as the [[United States Environmental Protection Agency|EPA]] or [[World Health Organization|WHO]].{{Cite web |last=US EPA |first=OMS |date=2016-11-17 |title=Chemicals and Toxics Topics |url=https://www.epa.gov/environmental-topics/chemicals-and-toxics-topics |access-date=2022-05-15 |website=www.epa.gov |language=en}}{{Cite web |title=Chemical safety |url=https://www.who.int/health-topics/chemical-safety |access-date=2022-05-15 |website=www.who.int |language=en}} [[Biological half-life|How long these chemicals stay in the body]], the [[lethal dose]] and other factors are the main focus of Ecotoxicology. [303] => [304] => == See also == [305] => {{div col|colwidth=20em}} [306] => * [[Bateman equation]] [307] => * [[Blood alcohol concentration]] [308] => * [[Biological half-life]] [309] => * [[Bioavailability]] [310] => * [[Cooperstown cocktail]] [311] => * [[Enzyme kinetics]] [312] => * [[Pharmacodynamics]] [313] => * [[Idiosyncratic drug reaction]] [314] => * [[Drug interaction]] [315] => * [[Patlak plot]] [316] => * [[Pharmacometrics]] [317] => * [[Pharmacy]] [318] => * [[Bioequivalence]] [319] => * [[Generic drugs]] [320] => * [[Physiologically based pharmacokinetic modelling]] [321] => * [[Plateau principle]] [322] => * [[Toxicokinetics]] [323] => {{div col end}} [324] => [325] => == References == [326] => {{reflist|30em}} [327] => [328] => == External links == [329] => {{external links|date=May 2016}} [330] => [331] => === Software === [332] => ; Noncompartmental [333] => * Freeware: [http://pkpd.kmu.edu.tw/bear/ bear] and [http://cran.at.r-project.org/web/packages/PK/index.html PK] for [[R (programming language)|R]], [https://github.com/PharmCat/MetidaNCA.jl MetidaNCA] for [[Julia (programming language)|Julia]] [334] => * Commercial: [https://pumas.ai/pumasCP PumasCP], [[MLAB]], [http://www.statistical-solutions-software.com/products-page/equivtest-for-equivalence-testing/ EquivTest], [http://www.thermoscientific.com/ecomm/servlet/productsdetail?productId=11962424 Kinetica], [http://www.mathworks.com/products/simbiology/ MATLAB/SimBiology], [http://aplanalyst.com/ PKMP],[https://www.certara.com/software/phoenix-winnonlin/ Phoenix/WinNonlin], [https://web.archive.org/web/20110719235952/http://www.summitpk.com/pksolutions/pksolutions.htm PK Solutions], [https://web.archive.org/web/20150407143248/http://www.mango-solutions.com/wp/products-services/products/rapidnca/ RapidNCA]. [335] => [336] => ; Compartment based [337] => * Freeware: [http://bmsr.usc.edu/software/adapt/ ADAPT], [http://www.boomer.org/ Boomer] ([http://pkpd.kmu.edu.tw/jguib/ GUI]), [http://www.sbpkpd.org/ SBPKPD.org (Systems Biology Driven Pharmacokinetics and Pharmacodynamics)], [https://web.archive.org/web/20110313141127/http://www.winsaam.com/ WinSAAM], [http://cran.csie.ntu.edu.tw/web/packages/PKfit/index.html PKfit] for R, [http://www.biopharmacy.ethz.ch/ PharmaCalc and PharmaCalcCL], Java applications. [338] => * Commercial: [https://pumas.ai/pumas Pumas], [https://precisepk.com PrecisePK], [http://www.imalytics.philips.com/products/pharmacokinetic-modeling/pharmacokinetic-modeling.page Imalytics], Kinetica, [http://www.mathworks.com/products/simbiology/ MATLAB/SimBiology], [https://www.certara.com/software/phoenix-winnonlin/ Phoenix/WinNonlin], PK Solutions, [[PottersWheel]], [http://www.integrativebioinformatics.com/processdb.html ProcessDB], [http://depts.washington.edu/saam2/ SAAM II]. [339] => [340] => ; Physiologically based [341] => * Freeware: [https://www.gnu.org/software/mcsim/ MCSim] [342] => * Commercial: [https://pumas.ai/ Pumas], [https://web.archive.org/web/20160109094324/http://acslx.com/ acslX], [http://www.cloegateway.com/ Cloe PK], [http://www.simulations-plus.com/Products.aspx?grpID=3&cID=16&pID=11 GastroPlus], [http://www.mathworks.com/products/simbiology/ MATLAB/SimBiology], [http://www.systems-biology.com/products/pk-sim.html PK-Sim], [http://www.integrativebioinformatics.com/processdb.html ProcessDB], [http://www.simcyp.com/ Simcyp], [https://web.archive.org/web/20080704113719/http://entelos.com/ Entelos PhysioLab] [https://www.certara.com/software/phoenix-winnonlin/ Phoenix/WinNonlin], [https://web.archive.org/web/20140221231528/http://www.admewb.com/ ADME Workbench]. [343] => [344] => ; Population PK [345] => * Freeware: [[WinBUGS]], ADAPT, S-ADAPT / SADAPT-TRAN, Boomer, [https://web.archive.org/web/20060716224622/http://www.winbugs-development.org.uk/pkbugs/home.html PKBugs], [http://www.lapk.org/pmetrics.php Pmetrics] for R. [346] => * Commercial: [https://pumas.ai/pumas Pumas], [https://precisepk.com PrecisePK], Kinetica, [http://www.mathworks.com/products/simbiology/ MATLAB/SimBiology], [http://lixoft.com/products/monolix/ Monolix], [[NONMEM]], [https://www.certara.com/software/phoenix-nlme/ Phoenix/NLME], [http://depts.washington.edu/saam2/popKinetics/index.html PopKinetics] for SAAM II, [http://www.lapk.org/software.php USC*PACK], [https://doseme-rx.com DoseMe-Rx], [https://web.archive.org/web/20150408064739/http://www.mango-solutions.com/wp/products-services/products/navigator/ Navigator Workbench]. [347] => [348] => ; Therapeutic drug monitoring (TDM) [349] => * Commercial: [https://pubmed.ncbi.nlm.nih.gov/34185914/ Lyv], [https://precisepk.com PrecisePK] [350] => [351] => ; Simulation [352] => All model based software above. [353] => * Freeware: [https://pumas.ai/ Pumas], [[COPASI]], [[Berkeley Madonna]], [http://xnet.hsl.gov.uk/megen/ MEGen]. [354] => [355] => === Educational centres === [356] => Global centres with the highest profiles for providing in-depth training include the Universities of [[Buffalo University|Buffalo]], [357] => [[Florida University|Florida]], [[University of Gothenburg|Gothenburg]], [[Leiden University|Leiden]], [[Otago University|Otago]], [[University of California, San Francisco|San Francisco]], [[Peking University|Beijing]], Tokyo, [[Uppsala University|Uppsala]], [[University of Washington|Washington]], [[Manchester University|Manchester]], Monash University, and University of [[Sheffield University|Sheffield]].{{cite journal | vauthors = Tucker GT | title = Research priorities in pharmacokinetics | journal = British Journal of Clinical Pharmacology | volume = 73 | issue = 6 | pages = 924–6 | date = June 2012 | pmid = 22360418 | pmc = 3391520 | doi = 10.1111/j.1365-2125.2012.04238.x }} [358] => [359] => {{Pharmacology}} [360] => {{Pharmacy}} [361] => [362] => {{Authority control}} [363] => [364] => [[Category:Pharmacokinetics| ]] [365] => [[Category:Pharmacy]] [366] => [[Category:Life sciences industry]] [] => )
good wiki

Pharmacokinetics

Pharmacokinetics is a branch of pharmacology that focuses on the study of how drugs are absorbed, distributed, metabolized, and eliminated by the body. It encompasses various processes, such as drug absorption through different routes (oral, intravenous, etc.

More about us

About

It encompasses various processes, such as drug absorption through different routes (oral, intravenous, etc. ), distribution throughout the body, metabolism by enzymes, and excretion through various routes (urine, bile, etc. ). Understanding pharmacokinetics is essential for optimizing drug therapy, as it helps determine the appropriate dosage regimens and predict drug interactions or adverse effects. This Wikipedia page provides an in-depth overview of pharmacokinetics, including its history, key concepts, mathematical modeling, and applications in clinical practice and drug development.

Expert Team

Vivamus eget neque lacus. Pellentesque egauris ex.

Award winning agency

Lorem ipsum, dolor sit amet consectetur elitorceat .

10 Year Exp.

Pellen tesque eget, mauris lorem iupsum neque lacus.

You might be interested in

Brain

The brain is a complex organ that serves as the center of the nervous system in humans and many other animals.

Ecotoxicology

Ecotoxicology is the study of the effects of toxic chemicals on biological organisms, especially at the population, community, ecosystem, and biosphere levels.

Enzyme

Enzymes are macromolecular biological catalysts that accelerate chemical reactions.

Fluoxetine

Fluoxetine is a medication commonly used for the treatment of major depressive disorder, bulimia nervosa, obsessive-compulsive disorder, panic disorder, and premenstrual dysphoric disorder.

Gentamicin

Gentamicin is an antibiotic medication that is primarily used to treat various types of bacterial infections.

Integral

An integral, in mathematics, is a fundamental concept that represents the area under a curve or the accumulation of quantities over a defined interval.

Kidneys

Liver

The liver is an organ in the human body located in the upper right abdomen.

Molecule

A molecule is a group of atoms bonded together, representing the smallest fundamental unit of a chemical compound that can take part in a chemical reaction.

Pharmacology

Pharmacology is a scientific discipline that focuses on the study of how drugs interact with the body.

Tacrolimus

Tacrolimus is a medication used to suppress the immune system and prevent the rejection of organ transplants.

Tenofovir

Thermodynamics

Thermodynamics is a branch of physics that deals with the relationship between heat, work, and energy.

Tobramycin

{{Infobox drug | verifiedrevid = 470611185 | image = Tobramycin.

Vancomycin

Vancomycin is a widely used antibiotic medication that is primarily used for the treatment of serious bacterial infections, particularly those caused by methicillin-resistant Staphylococcus aureus (MRSA) and other resistant bacteria.